• en
  • ro
  • bg

Energy Technology

Thermal power plants

  1. Energy Technology
  2. Thermal power plants

The reliability of thermal power plants that use fossil fuels (coal, oil or natural gas) to produce energy, relies also on the cleanliness level of all fluid systems. Filtration and separation technology are necessary to control the cleanliness of the water, steam and lubrication oil systems in a thermal power plant, offering extensive benefits.

Main applications:

Filtration of steam in the Heat Transfer System prevents against deposits on the pipes and turbine blades, erosion of the nozzles, turbine vibration and loss of efficiency.

Filtration of condensate water protects against deposits, corrosion on the boiler and pipe walls and reduces the frequency of blow down.

Filtration of cooling water protects condenser tubes from deposits that decrease thermal exchange and causes increased fuel consumption.

Filtration and purification of steam turbine lubricating oil prevents against wear, varnish formation that leads to clogged lines and bearing failures.

Filtration of coal pulverizers hydraulic oil protects gears, bearings, pumps and seals from fatigue, erosive and abrasive wear.

Moisture and particulate removal from gases in the combustion chamber prevents against deposits and corrosion.

Filtration of cooling system water protects heat exchangers and increases thermal efficiency.

Filtration & Separation Solutions

Choose filtration and purification solutions

Ask for a complete offer

Pall Rigimesh metallic filters offer reliable and guaranteed performances in high temperature environment.

 

Pall Athalon and Coralon filters, with ratings from 3 µm to 25 µm and removal efficiency up to Betax(c)≥2000, are manufactured with Stress Resistant Technology and tested under cyclic conditions.

 

Pall Red1000, the retrofit range of competitor elements, offers improved process performance and same filter media resistant to cyclic conditions, as Coralon, with no investment cost.

 

Choose Pall Mobile Oil Purifiers, that uses vacuum dehydration technology, to remove free water and gases, and as much as 90% of dissolved water and gases from oil.

 

Varnish removal units (Pall VRF), that use SUPRAdisc technology, is suitable for highly contaminated oils, to prevent its chemical degradation.

 

Pall Ultipleat HF filter cartridge, with laid-over-pleat configuration, is the perfect solution in high flow rate applications.

 

Pall Hydro-Guard backwash filters offer high service life and ease to sterilize.

 

We offer custom-made microfiltration/ ultrafiltration (MF/UF) solutions, like Pall Aria, that fits your budget and capacity needs.

 

Disc Tube Reverse Osmosis (DTRO) systems are the most performant and resistant membranes on the market, that can treat very difficult waters.

 

Rental equipment

We are constantly developing a fleet of testing or rental equipment, offering the opportunity to improve fluid cleanliness for a low cost. In addition, we test the effectiveness and efficiency of our solution to ensure that we deliver what we promised.

The Mobile Filtration Units (MFU) with high efficiency Pall Athalon filters can rapidly achieve the desired cleanliness of the oil.

 

Varnish removal units (Pall VRF), that use SUPRAdisc technology, is suitable for highly contaminated oils, to prevent its chemical degradation.

 

The Pall Oil Purifier uses vacuum dehydration technology to remove free water and gases, and as much as 90% of dissolved water and gases from oil.

 

Mobile coalescers for liquid/liquid and liquid/gas separation

 

Fluid analysis

For more information about Klarwin Laboratory analyses, visit the Scientific & Laboratory page.

Download the brochure

Download

Success stories

Coming soon

Interested to find out more?

Ask a specialist!